Tools
3D printing calculators
Small tools built on the same data sheets as the guides. Each one lists the figures it uses and where they come from.
ToolFilament drying calculator
Drying temperature and time for 13 filaments from Bambu Lab, Polymaker and Prusa data, with a check of whether an AMS or your dryer gets hot enough.
Open calculator
ToolFilament length calculator
Turn the grams left on a spool into metres and cost, using densities from Polymaker, Prusament and Bambu Lab data sheets, for 1.75 and 2.85 mm.
Open calculator
Tool3D print cost calculator
Work out what one print costs from the grams and hours your slicer reports, the spool price and your electricity tariff.
Open calculator
ToolFilament temperature chart
Nozzle and bed temperatures, enclosure needs, moisture sensitivity and heat resistance for 10 filament types, from Prusa, Polymaker and Prusament data.
Open calculator
ToolVolumetric flow calculator
Turn print speed, layer height and line width into volumetric flow, and find the top speed your hot end's flow limit allows.
Open calculator
ToolShrinkage and scale calculator
Measure a printed test part and get the scale factor that brings the next print to size, plus the shrinkage in percent.
Open calculator